CDP CONTROL PANEL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
202/266
5. To confirm the setting and to return to the actual signals display, press the
ENTER key.
6. To cancel the setting and keep the original setting, press any of the mode
selection keys. The selected keypad mode is entered.
9.2.5. Local and remote control mode
The local-remote feature of the CDP control panel allows selecting the control
location of the drive. Possible are:
– Local control (L)
– Remote control (R)
NOTE – In this context, remote control is not necessarily equivalent to higher-
level control. For more information, see “9.2.5.4 Remote control” on page 204.
1 L -> 0.0 rpm
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 6
ENTER
ACT PAR FUNC DRIVE
1 L -> 0.0 rpm
UPLOAD <= <=
DOWNLOAD => =>
CONTRAST 6
To Next Page
Loading...
