ABB ACS6080 - Routing Cables in an EXU Cabinet with an ED7 Y Type DCS800 Converter; Figure 6-40 DCS800 Converter (ED7 Y); Figure 6-41 COM-8 X Circuit Board (A) in a DCS800 Converter (ED7 Y Type) and a Detail of Channel CH0 (B) on the Board

ELECTRICAL INSTALLATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
151/266
6.8.7.4. Routing cables in an EXU cabinet with an ED7Y type DCS800 converter
1. Unscrew the rectangular cover from the DCS800 unit.
Figure 6-40 DCS800 converter (ED7Y)
2. Connect the two optical fibers to the receptacles of channel CH0 (B) on the
COM-8x circuit board (A) according to the terminal numbers printed on the
marker sleeves.
Figure 6-41 COM-8x circuit board (A) in a DCS800 converter (ED7Y type) and a detail
of channel CH0 (B) on the board
1) Control panel 2) Removable cover
1
2
CH0
A
B