OPERATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
161/266
8. Operation
8.1. Overview
This chapter outlines the local operation of the drive.
NOTE – Control of the drive via a PLC or higher-level control system is not
described in this chapter. If the drive is controlled from a remote location, see the
applicable manuals for information.
The status messages and parameter settings used in this chapter are typical
examples to illustrate the related instructions and display functions and may
therefore differ from the actual status messages and parameter settings in the
drive.
8.2. Operating conditions
The operating conditions for the drive are according to IEC 60721-3-3.
– Classification: 3K22 / 3B1 / 3S6 / 3M11
8.3. Safety
The drive system must only be operated by qualified and authorized
personnel, ie, personnel who are familiar with the operation of the drive
system and the hazards involved.
To Next Page
Loading...
