POWER ELECTRONICS AND CABINET FEATURES
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
49/266
3.2.4. Terminal unit (TEU)
Mains and motor cables of the drive are connected to terminal busbars of TEUs. 
These units are designed for top or bottom cable entry.
The terminal units are available either as individual units or are integrated into a 
master COU or ARU.
The width of the unit (600 mm or 1000 mm) depends of the number of line supply 
units or active rectifier units and/or the motors supplied via one terminal unit.
Figure 3-10 TEU (1000 mm)
1) DC busbars
2) AC busbars
3) Cable entry frame
4) PE ground busbars
3
2
4