ABB ACS6080 - Installing Roof Attachments; Figure 5-23 Roof Attachment Parts

MECHANICAL INSTALLATION
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
115/266
5.11.2. Installing roof attachments
This section applies to marine drives.
The roof attachments prevent tilting of the cabinets and dampen vibrations. Struts
for attaching the cabinets to the wall of the drive room are not supplied.
For information on the fitting location, see “Appendix C - Mechanical drawings”.
Figure 5-23 Roof attachment parts
Item Details ID number
1) 2 x nuts M12 HZN 452198P1022
2) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
3) 2 x washers 17 x 30 x 3 9ABA450078P0008
4) 2 x hex-head bolts M16 x 40 NB 312350P0464
5) 1 x bracket 3BHB035997R0002
6) 2 x spacers 3BHB032466R0001
7) 1 x damping pad 3BHB035998R0001
8) 1 x bracket 3BHB035997R0001
9) 2 x damping connectors 3BHB033405R0001
10) 2 x plates 3BHB035999R0001
11) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
12) 2 x hex-head bolts M12 x 80 NB 312450P8127
1
2
3
4
5
6
7
8
9
10
11
12