ABOUT THIS MANUAL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
27/266
1.5. Target groups and required qualification
The drive presented in this manual is part of an industrial environment where
voltages are present that contain a potential hazard of electric shock and / or burn.
For this reason, only personnel who have a thorough knowledge of the drive and
the industrial environment and have obtained the required qualification should
handle, install, operate, or maintain the drive.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the drive. The
personnel must carry out the below listed tasks in a manner that does not cause
physical harm or danger, and ensures the safe and reliable functioning of the drive.
IMPORTANT! Commissioning of the drive must only be performed by qualified and
certified ABB personnel.
1.5.1. Handling
Personnel must be skilled and experienced in unpacking and transporting heavy
equipment.
Table 1-6 Service
Title Document ID.
Service equipment 3BHS264536 E01
ACS6000 Service manual 3BHS202077 E01
Table 1-7 Communication interfaces
Title Document number
AF 100 fieldbus - NAFA-01 installation and start-up guide 3BFE58919837
DCS800 drives firmware manual 3ADW000193R0801
Emergency off/stop modes and prevention of operation & safe
torque off
3BHS196243
Modbus TCP - NETA-21 remote monitoring tool user manual 3AUA0000096939
Modbus RTU - NMBA-01 installation and startup guide 3AFY58919772
Profibus - NPBA-12 installation and startup guide 3BFE64341588
S800 I/O Getting started 3BSE020923
S800 I/O Modules and termination units 3BSE020924
Table 1-8 User manuals related to drive units
Title Document ID.
ACS5000, ACS6000 and ACS6080 water cooling unit WCU800
user manual
3BHS821937 E01
ACS5000, ACS6000 and ACS6080 water cooling unit WCU1400
user manual
3BHS835714 E01
To Next Page
Loading...
