ABB ACS6080 - Changing a parameter setting

CDP CONTROL PANEL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
197/266
9.2.3.2. Changing a parameter setting
1. To enter the parameters mode, press the PAR key.
2. To select a different group, press a fast navigation key.
3. To select a parameter, press a slow navigation key.
4. To enter the parameter setting function, press the ENTER key.
PAR
1 L -> 600.0 rpm
77 SYSTEM CONFIG
01 INU IdentifySel
INU1 (MASTER)
1 L -> 600.0 rpm
75 OPTION MODULES
06 C3P1/AI820 Module
DISABLED
1 L -> 600.0 rpm
75 OPTION MODULES
06 C3P1/AI820 Module
DISABLED
1 L -> 600.0 rpm
75 OPTION MODULES
07 C3P1/AI820 Module
[DISABLED]
ENTER