ABB ACS6080 - Closing and locking the doors

PREVENTIVE AND CORRECTIVE MAINTENANCE
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
224/266
10.4.5. Closing and locking the doors
1. Close the doors.
2. To lock the door, bring the door handle in line with the door plate (1) and
press the handle down (2) until it clicks in.
3. Slide the locking bar from the unlocked (1) to the locked (2) position.
• Door hinged on the left:
• Door hinged on the right:
IMPORTANT! A limit switch monitors the locked position. If a door is not locked
properly, you cannot start the drive.
1
2
1
2
1
2