CDP CONTROL PANEL
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
195/266
9.2.3. Parameters mode
Figure 9-3 Control panel functions for Parameters mode
NOTICE Risk of component damage.
Running the drive system with incorrect data can result in improper
operation, reduction of control accuracy and damage of equipment.
– Parameters must only be set by qualified personnel.
– DO NOT change any parameter, if the meaning of the parameter and
the effects of the change are not fully understood.
1) Status line
2) Group number and name
3) Parameter number and name
4) Parameter value
5) Selection key for parameters mode
6) Fast navigation key for selecting a
parameter group (and a parameter value)
7) Slow navigation key for selecting a
parameter (and a parameter value)
8) Enter key for confirming the selection
2
4
5
6
1 L -> 600.0 rpm
77 SYSTEM CONFIG
01 INU IdentifySel
INU1 (MASTER)
8
7
To Next Page
Loading...
