PREVENTIVE AND CORRECTIVE MAINTENANCE
PRODUCT
ACS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS212794 E01
REV.
N
LANG.
en
PAGE
207/266
10. Preventive and corrective maintenance
10.1. General information
During the warranty period of the drive, any maintenance must be carried out
exclusively by ABB service personnel. After the warranty period, repair work must
be carried out by certified personnel.
10.1.1. Required qualification
To maintain safe and reliable operation of the drive, ABB recommends taking out a
service contract with the ABB service organization.
10.1.2. Maintenance schedule
Carry out all maintenance tasks according to the maintenance schedule, on time
and at the stated intervals in the “ACS6000 preventive maintenance schedule”
(3BHS855273 E01).
10.1.3. Logbook
ABB recommends recording all troubleshooting and maintenance work in a
logbook including:
– Date and time
– Detailed description
10.1.4. Spare parts
To ensure safe and reliable operation, use only spare parts recommended and
approved by ABB.
– For information on types and identification codes, see “Appendix A -
Additional manuals”.
– For information on storing spare parts, see “4.6.3 Storing and handling of
spare parts” on page 82.
To Next Page
Loading...
