To Next Page

To Previous Page

A. From the Home screen, navigate to: More Opons > Instrument Opons > Network Sengs >

Network Services

B. Enter your Operator ID and sequence through the workow to view the press Next to view the

Firmware Delivery opon. Verify Enabled is selected.

5. The baery charge level is no less than 51%.

To verify:

A. From the Home Screen, navigate to: More Opons > Instrument Status

B. Locate Baery and verify level is 51% or higher.

Procedure:

Perform the following steps to download and install soware update:

UTION: During the installaon, do not remove the instrument from the Base Staon. When the

installaon is complete, the instrument will display a message indicang that new soware has been

installed. When installaon is complete, the instrument may be removed from the Base Staon.

1. From the Home screen, navigate to: More Opons > Instrument Opons > Soware Installaon >

Check for Update

2. Aer the soware download is completed, installaon of soware can begin. Please skip step 3.

3. Soware download and installaon can be performed at dierent mes if needed. The i‑STAT Alinity

will display the following symbol

on the Home screen in the lower right hand corner if

sow

are is downloaded but not installed. Touch this icon to display the Soware Installaon menu.

Touch the Install Pending buon to install the soware.

4. Follow the on-screen instrucons to connue with soware installaon.

5. When presented with the name of the soware package to be installed, record the name before

proceeding (this informaon may be used at the end of the procedure to verify that the soware

update has been completed).

• Touch Next to connue with the installaon of the soware package, OR

• Touch Cancel to terminate the installaon

6. Connue to follow the on-screen instrucons. During the installaon process, the instrument screen

will go blank and remain blank for several minutes. This is normal.

• Do not remove the instrument from the Base Staon

7. When the installaon is complete, the instrument will display a message indicang that new soware

has been installed. The display of this message is the indicaon that it is safe to resume normal

operaon of the instrument.

102

i-STAT Alinity — System Operaons Manual Art: 754496-01 Rev. E Rev. Date: 02-Nov-2022

Abbott i-STAT Alinity User Manual

Other manuals for Abbott i-STAT Alinity