Abbott i-STAT Alinity - Statnotes Category

STATNotes Category
STATNotes are used to obtain relevant paent informaon, such as respiratory parameters, at the me of
a test. Much like proles that are built with categories, STATNotes are built using sets. Addionally, sets
are built with items. Items are what the operator sees on the instrument. Items require responses. Items
are assigned to a set. This is performed in the Manage Set secon. Connue through the process unl
the set is published. Once a set is published it is available for assigning to a cartridge type when building
a STATNote. The informaon below will explain the process in detail.
Items listed with names that begin with "APOC" are predened. Details of each APOC predened item
can be viewed by clicking on the item and then clicking on View. If the predened item sases the
needs of the customer, no further acon is required and the item is ready to be added to a set. If
changes to the APOC predened item are required, follow the instrucons for Create from Exisng in
the General Sengs secon of this document.
Begin building an item. Click on Manag
e and Assemble Proles > STATNotes > Manage Items > Create.
The following item types are available: Data Entry, Selecon List, Selecon List with text box, Delivery
System, Mode and Paent Temperature. Each of these choices is detailed below.
209
i-STAT Alinity — System Operaons Manual Art: 746300-01 Rev. N Rev. Date: 02-Nov-2022