Abbott i-STAT Alinity - Cleaning and Disinfecting

Printout Text System Administrator Acon
Printer Failure. Use another
printer. Report failed
printer to System
Administrator. 004
Reset the failed printer:
1. Turn o the printer and unplug the power cord.
2. Open the baery compartment and unplug the baery.
3. Leave the baery unplugged for at least 10 seconds.
Then reconnect the baery and close the baery
compartment.
4. Reconnect the power cord. Then, press the power
buon to turn the printer on. Aempt to print a record
from the instrument. If a printer failure occurs, contact
Technical Support.
Cleaning and Disinfecng
Complete instrucons for cleaning and disinfecng are found in the Quick Reference Guide. The graphics
below are a visual representaon of the wiping procedure for disinfecon.
69
i-STAT Alinity — System Operaons Manual Art: 745525-01 Rev. E Rev. Date: 04-Mar-2021