Abbott i-STAT Alinity - Units

Units
Specify the measurement unit to be used for an analyte. In addion, for some analytes you can select
the analyte name. For example, BUN or Urea. To change a value, click the drop down list and select an
opon.
Note: If you change units for an analyte, you may also need to adjust reference ranges,
acon ranges, and custom reportable ranges for that analyte.
When nished, choose from the opons shown at the boom of the screen:
• Previous to go back to the previous screen
• Discard to undo changes
• Finish Later to create a dra
• Next to open the next tab
180
i-STAT Alinity — System Operaons Manual Art: 746300-01 Rev. N Rev. Date: 02-Nov-2022