Agilent Technologies 4288A User Manual

20 Chapter 2
Overview of Remote Control
Setting Up a GPIB Remote Control System
Setting the GPIB address for the Agilent 4288A
Step 1. Press the
[Adrs] ([Blue] - [Lcl]) key. This brings up the screen shown in Figure 2-2, where
the initial value is the current setup of the address (in this example, 17).
Figure 2-2 GPIB address setup screen
Step 2. Use the numeric and other necessary keys to enter the address and then press the
[Enter]
key.

Agilent Technologies 4288A Specifications

General

Brand	Agilent Technologies
Model	4288A
Category	Measuring Instruments
Language	English