Lesson 2 – Creating a Test Method
443
Test Method Panel for a C function style API
The following describes the parts of above panel.
• Syntax Selection Area:
This area displays the syntax of the function. If the function has
some syntax types, this area displays a selection box for selecting
a syntax type for the function. Select the desired type from the
option menu.
• Function Parameter Area:
This area displays the entry boxes or selection boxes for setting
up parameters of the function, depending on the syntax type
selected in the syntax selection area.
Entering an API
Statement
To enter a Test Method API at the desired location in the Text
Editor window, do as follows:
1 Move the insertion cursor to where you want to enter the API
statement.
2 Press the right mouse button (a pop-up menu appears as shown
below) and select the API that you want to enter. The Test Method
Panel appears.
To Next Page
Loading...
