Agilent Technologies 93000 SOC Series - Executing the ADC Distortion Test

Lesson 5 – Executing the ADC Distortion Test
354
In this Lesson ...
Overview You will now learn how to set up and execute the ADC Distortion
test. For the ADC Distortion test, you will apply a sine wave
signal, capture the response, and finally calculate the total
harmonic distortion (THD) and the signal-to-noise ratio (SNR).
This lesson covers the following topics:
• Explanation of the standard DAC distortion tests
• Description of the DAC Distortion testfunction parameters
What you will learn After this lesson you will know how set up the DAC Distortion
testfunction.
Related documents More details about the testfunction can be found in the manual
• Agilent 93000 SOC Series “Standard Test Function Reference”.
The Mixed-Signal Tool is described in
• Agilent 93000 SOC Series “Test Setup”