Agilent Technologies 93000 SOC Series - Reviewing and Changing the Waveform Memory

Lesson 2 – Waveform Digitizer Setup with the Analog Setup Tool
192
2-6 Reviewing and Changing the
Waveform Memory
You may wish to review how the waveform memory of the current
analog module core has been set up. You may also wish to modify
the size of a Waveform Label, or to delete a label.
All this can be done on Waveform Memory setup page.
NOTE The Waveform Memory page provides optional functions. A test can
be set up without using that page.
Waveform Memory Setup Screen
How to View All Waveform Labels
The waveform labels are referenced by commands within a
sequencer programs.
To see all waveform labels:
1 Open the SEQ PROGRAM browser.