Agilent Technologies 93000 SOC Series - Defining the Signal Routing

Lesson 4 – Defining the Signal Routing
210
In this Lesson ...
Overview This lesson explains how to define the routing of the High Speed
Digitizer for the DAC test with the Routing Setup Tool.
This lesson covers the following topics:
• Analog Routing Basics
• Overview of the Routing Setup Tool
• How to set up the routing for the DAC test
• Activating a routing set
• Viewing the switched routing paths at run time.
What you will learn After this lesson you will know how to set up the routing of the
High Speed Digitizer for the DAC test and you will have a general
understanding of how to use the Routing Setup Tool to define the
input/output routing for different analog modules and different
measurement tasks.
Related documents The Routing Setup Tool is described in detail in the manual
• Agilent 93000 SOC Series “Test Setup”.