Lesson 2 – Creating a Test Method
448
2-6 Setting Up Testmethod-Based Test
Suite
You can set up a testmethod-based test suite with the following
two steps:
1 Adds test suites
2 Sets parameters for each test suite
For details, see the following sub-sections.
Adding Testsuites
Prior to applying parameters, you have to invoke the Test Flow
Editor. To do this, double-click the testflow icon on the data
manager window or press the Testflow button from the main menu
pushbuttons. The Test Flow Editor comes up.
To create the testmethod-based testsuite in the testflow, do as
follows.
1 In the Test Flow Editor, select the “run test” or “run & branch”
option from the “Insert” pull-down menu. Then, an empty testsuite
icon appears.
2 Click the “Setup a Testsuite” button. Then a testsuite dialog shown
in the following figure appears, for actually defining what
comprises the testsuite.
3 At the top of the testsuite dialog, activate the testmethod radio
button to use the test method.
4 Fill in the necessary fields. See the figure below.
To Next Page
Loading...
