Agilent Technologies 93000 SOC Series - Analog Pins of the Board

Lesson 2 – Addressing the Analog Modules
134
2-2 Analog Pins of the Board
On the DUT board, each pogo pin group consists of 17 channels,
and each channel consists of one signal contact and two related
ground contacts as follows:
Pogo Pin Group
The pin utilization of the pin group is different depending on
which analog module is used for the group. The following tables
list the pogo pin assignments for analog source modules, analog
measurement modules, time interval analyzer, and multi-site
baseband analog modules.
Ground PinsSignal Pin
21436510 711121314151617 89
S2
(A)
Orientation
Marker