Agilent Technologies 93000 SOC Series - The Training DAC

Lesson 1 – The Training DAC
156
In this Lesson ...
Overview This lesson informs you about the digital-to-analog converter
(DAC) which you will test in this training.
This lesson covers the following topics:
• DAC Basics
• Characteristics of the Training DAC
• Overview of the DAC Test Setup Procedure
What you will learn After this lesson you will know the basic setup steps for testing
the training DAC.
Related documents The general setup procedure and the tools for setting up the pins,
levels, timing, and vectors have been discussed in the
• Agilent 93000 SOC Series User Training, Part 1.
Detailed information is available in the manual
• Agilent 93000 SOC Series “Test Setup”.