Agilent Technologies 93000 SOC Series - Summary and Discussion

Lesson 4 – Defining the Signal Routing
223
4-6 Summary and Discussion
This lesson has made you familiar with the Routing Setup Tool.
You have learnt how to use the tool to create routing commands
and routing sets, and how to save these sets in the routing setup
file. The routing sets that will be used in the DAC test served as an
example to explain the usage and the capabilities of the Routing
Setup Tool.
Further, you have learnt how to activate a routing set in a
testfunction and in a test method, and how to monitor the
switched routing paths at run time with the Analog Setup Tool.