Agilent Technologies 93000 SOC Series User Manual

Lesson 6 – Executing the DAC Linearity Test
254
In this Lesson ...
Overview You will now learn how to execute the DAC linearity test. The
Mixed-Signal Tool will be used for uploading and displaying the
test results.
This lesson covers the following topics:
• Explanation of the standard DAC linearity test measurements
• Explanation of the DAC Linearity testfunction parameters
• Display and interpretation of the measured DNL/INL
What you will learn After this lesson you will know how to set up the testfunction for
the DAC Linearity test, and how to display and interpret waveform
results.
Related documents The testfunctions are documented in the manual
• Agilent 93000 SOC Series “Standard Test Function Reference”.
The Mixed-Signal Tool is described in
• Agilent 93000 SOC Series “Test Setup”

Agilent Technologies 93000 SOC Series Specifications

General

Brand	Agilent Technologies
Model	93000 SOC Series
Category	Test Equipment
Language	English