Agilent Technologies 93000 SOC Series User Manual

Lesson 3 – Setting up the Digitizers in the Digital Clock Domain
198
In this Lesson ...
Overview This lesson will make you familiar with the concept of clock
domains and discusses how to set up the clocking for the digitizers
used for the DAC test.
The digitizers will be set up in the digital clock domain, that is,
their master clock will be provided by the same clock source that
also provides the clock signal to the digital channels of the tester.
The analog clock domain, which is an alternative clock domain for
analog modules only, and its setup specifics will be discussed in
Unit 5.
The Clock Domain Setup page of the Analog Setup Tool lets you
make all settings for analog modules in either clock domain.
In this lesson, you will learn how to make the settings for the
digital clock domain.
What you will learn After this lesson you will know how to use the Analog Setup Tool
to set up the clocking of the digitizers in the digital clock domain.
Related documents The digital and analog clock domain, and how to set up analog
modules in each, is described in detail in the manual
• Agilent 93000 SOC Series “Test Setup”.

Agilent Technologies 93000 SOC Series Specifications

General

Brand	Agilent Technologies
Model	93000 SOC Series
Category	Test Equipment
Language	English