Agilent Technologies 93000 SOC Series - Waveform Digitizer Setup with the Analog Setup Tool

Lesson 2 – Waveform Digitizer Setup with the Analog Setup Tool
166
In this Lesson ...
Overview This lesson makes you familiar with the Analog Setup Tool which
is used to set up the analog modules.
You will be introduced to all the features of the tool that you will
need to set up the digitizer for the DAC test in the following lab
exercise.
The topics covered in this lesson are:
• Functional overview of the Analog Setup Tool
• Starting the Analog Setup Tool
• Analog Module Selection and Global Functions
• Setting Up the Analog Hardware
• Setting Up the Sequencer and Waveform Memory
• Viewing and Changing the Waveform Memory
• Setting up the Clock Domain
• Viewing the Relay Multiplexer Switches
What you will learn After this lesson you will know the main capabilities of the Analog
Setup Tool, and how to use it to set up a waveform digitizer.
Related documents Detailed information about the Analog Setup Tool can be found in
the manual
• Agilent 93000 SOC Series “Test Setup”.