EasyManua.ls Logo

Alcatel-Lucent 7360 - Page 396

Alcatel-Lucent 7360
1073 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 — VoIP overview
5-50 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
enable_supp_ring Indicates whether the
suppressed ringing service is
enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no”.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
enable_forced_hold Indicates whether the forced
hold behavior is enabled for an
emergency call. This is a string
containing a value of “yes” or
“no.” This is an optional
parameter. The default value is
“no.”
NYAll
except
package
C, D, E,
I-240W-
S ONT
Yes TL1 using
CALLPROGTR
AN set to 40
using
ent-profile-v
oipappservic
e
CLI using
emer-ser-org
-hold
using
configure
voice ont
voip-app-serv
ice
supp_ring_offhook_t
imer
The time interval within which
the device must go offhook for a
suppressed ringing call. This is a
non-negative integer. The value
is expressed in seconds. The
default value is 5.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
supp_ring_interrupt
_timer
The time interval within which
the device must go onhook if a
suppressed ringing call is
interrupted. This is a
non-negative integer. The value
is expressed in seconds. The
default value is 2.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
conference_uri The URI of the conference server
to be used for the 6-way
conference service.
NYPackage
A, B, H
only
Yes TL1 using
CONFURIPRO
FID using
ent-profile-v
oipappservic
e
CLI using
conf-prof
using
configure
voice ont
voip-app-serv
ice
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(8 of 30)

Table of Contents

Related product manuals