Diagnosing Switch Problems Monitoring Switch Health
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 34-37
Displaying Health Threshold Limits
The show health configuration command is used to view all current health thresholds on the switch, as
well as individual thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage and CPU
usage.
To view all health thresholds, enter the following command:
-> show health configuration
Rx Threshold = 80,
TxRx Threshold = 80,
Memory Threshold = 80,
CPU Threshold = 80,
Sampling Interval (Secs)= 10
Note. For detailed definitions of each of the threshold types, refer to “Configuring Resource Thresholds”
on page 34-36, as well as Chapter 52, “Health Monitoring Commands,” in the OmniSwitch AOS Release 8
CLI Reference Guide.
To Next Page
Loading...
