Configuring ERP Sample ERPv2 Ring Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 11-25
Switch B -> vlan 100-300 members port 2/2 tagged
Switch B -> vlan 201-400 members port 1/6 tagged
Configuring Switches in Main Ring
The following configurations must be performed on Switch C, D, and E
-> vlan 10
-> vlan 10 members port 1/2 tagged
-> vlan 10 members port 2/1 tagged
-> erp-ring 1 port1 1/2 port2 2/1 service-vlan 10 level 1
-> vlan 100-300
-> erp-ring 1 enable
-> vlan 100-300 members port 1/2 tagged
-> vlan 100-300 members port 2/1 tagged
Configuring Secondary RPL Node
The following configurations must be performed on Switch F in the ERPv2 Ring network:
-> vlan 200-400
-> vlan 200-400 members port 1/6 tagged
-> vlan 200-400 members port 2/2 tagged
-> erp-ring 2 port1 1/6 port2 2/2 service-vlan 200 level 1
-> erp-ring 2 rpl-node 1/6
-> erp-ring 2 enable
Configuring Switch in Sub Ring
The following configurations must be performed on Switch G in the ERPv2 Ring network:
-> vlan 200-400
-> vlan 200-400 members port 1/1 tagged
-> vlan 200-400 members port 1/6 tagged
-> erp-ring 2 port1 1/1 port2 1/6 service-vlan 200 level 1
-> erp-ring 2 enable
To Next Page
Loading...
