Configuring Dual-Home Links Displaying the Dual-Home Link Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 10-12
Displaying the Dual-Home Link Configuration
You can use Command Line Interface (CLI) show commands to display the current configuration and
statistics of link aggregation. These commands include the following:
show linkagg Displays information on link aggregation groups.
show linkagg port Displays information on link aggregation ports.
show dhl Displays the global status of the DHL configuration.
show dhl num Displays information about a specific DHL session.
show dhl num link Displays information about a specific DHL link, for example linkA or
linkB and the VLAN details of the specified link.
Note. See the “Link Aggregation Commands” chapter in the OmniSwitch AOS Release 8 CLI Reference
Guide for complete documentation of show commands for link aggregation.
To Next Page
Loading...
