Managing Policy Servers Verifying the Policy Server Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 27-7
Interaction With CLI Policies
Policies configured via PolicyView can only be modified through PolicyView. They cannot be modified
through the CLI. Any policy management done through the CLI only affects policies configured through
the CLI. For example, the qos flush command only removes CLI policies; LDAP policies are not affected.
Also, the policy server flush command removes only LDAP policies; CLI policies are not affected.
For more information about configuring policies through the CLI, see Chapter 26, “Configuring QoS.”
Verifying the Policy Server Configuration
To display information about authentication and policy servers, use the following commands:
Note. If polices are applied from PolicyView or vice versa, it activates all current configuration.
show policy server Displays information about servers from which policies can be
downloaded to the switch.
show policy server long Displays detailed information about an LDAP policy server.
show policy server statistics Displays statistics about policy directory servers.
show policy server rules Displays the names of policies originating on a directory server that
have been downloaded to the switch.
show policy server events Displays any events related to a directory server.
To Next Page
Loading...
