Configuring ERP Verifying the ERP Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 11-26
Verifying the ERP Configuration
A summary of the show commands used for verifying the ERP configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide.
show erp Displays the ERP configuration information for all rings, a specific ring,
or for a specific ring port.
show erp statistics Displays the ERP statistics for all rings, a specific ring, or a specific ring
port.
show ethernet-service Displays configuration information for VLAN Stacking Ethernet
services, which includes SVLANs and NNI port associations.
show ethernet-service nni Displays the VLAN Stacking NNI configuration.
ethernet-service transparent-
bridging
Displays a list of SVLANs configured for the switch.
To Next Page
Loading...
