Configuring Dual-Home Links Dual-Home Link Active-Active Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 10-2
Dual-Home Link Active-Active Defaults
The table below lists default values for dual-home link aggregate groups.
Parameter Description Command Default Value/Comments
DHL session ID dhl name If a name is not assigned to a
DHL session, the session is
configured as DHL-1
Admin state of DHL session dhl num admin-state disable
Configure a port/link agg as DHL dhl num linka linkb NA
Configure a VLAN-MAP dhl num vlan-map linkb NA
Pre-emption timer for the DHL
session
dhl num pre-emption-time 30 seconds
To Next Page
Loading...
