Configuring IPsec IPsec Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 18-2
IPsec Defaults
The following table shows the default settings of the configurable IPsec parameters.
Parameter Description Command Default Value/Comments
IPsec global status (A license file
must be present on the switch)
Disabled
Master security key for the switch ipsec security-key No master security key set
IPsec policy priority ipsec policy 100
IPsec security policy status ipsec policy Disabled
IPsec discard policy status ipsec policy Enabled
IPsec SA status ipsec sa Disabled
Key length AES-CBC ipsec sa 128 bits
To Next Page
Loading...
