Managing Source Learning Using Static Multicast MAC Addresses
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 3-6
Static Multicast MAC Addresses on Link Aggregate Ports
Static multicast MAC addresses are not assigned to physical ports that belong to a link aggregate. Instead,
they are assigned to a link aggregate ID that represents a collection of physical ports. This ID is specified
at the time the link aggregate of ports is created and when using the mac-address-table static-multicast
command.
To configure a static multicast MAC address on a link aggregate ID, use the mac-learning multicast
mac-address command with the linkagg keyword to specify the link aggregate ID. For example, the
following command assigns a static multicast MAC address to link aggregate ID 2 associated with VLAN
455:
-> mac-learning vlan 455 linkagg 2 multicast mac-address 01:95:2A:00:3E:4c
To Next Page
Loading...
