Configuring VLAN Stacking VLAN Stacking Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 35-2
VLAN Stacking Defaults
Parameter Description Command Default Value/Comments
SVLAN administrative and
Spanning Tree status.
spantree vlan admin-state Enabled
Vendor TPID and legacy BPDU
support for STP on a VLAN
Stacking network port.
ethernet-service nni TPID = 0x8100
legacy STP BPDU = dropped.
Acceptable frame types on a VLAN
Stacking user port.
ethernet-service sap cvlan None.
Traffic engineering profile attributes
for a VLAN Stacking Service Access
Point (SAP).
ethernet-service sap-profile ingress bandwidth = shared
ingress bandwidth mbps = 0
CVLAN tag is preserved.
SVLAN priority mapping = 0
Treatment of customer protocol
control frames ingressing on a
VLAN Stacking user port.
ethernet-service uni-profile Processed Frames:
UDLD, OAM, LACPMarker
Tunneled Frames:
802.1ab, 802.3ad, STP, MVRP,
Discarded Frames:
VTP, VLAN, Uplink Fast,
PVST, PAGP, DTP, CDP
To Next Page
Loading...
