Configuring Access Guardian BYOD Application Examples
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-142
BYOD Application Examples
The application scenarios provide various examples of how the ClearPass server and the OmniSwitch can
be leveraged to provide different network access levels and Universal Network Profiles (UNPs) for
employees, guests, and other network-based devices.
In the following contexts the main parameters (such as a UNP name, VLAN ID, and other parameters
specified in the application examples), are as follows:
Employee Registered Device — 802.1X Authentication
– UNP = UNP-employee
–VLAN = 96
IP Phone — MAC Authentication
– UNP = UNP-phone
– VLAN = 1002
Guest Device —MAC Authentication with Guest Login
– Registration UNP = UNP-restricted
– Registration VLAN = 96
– Redirect Server = 10.255.95.206
– Guest UNP = UNP-guest
– Guest VLAN = 96
Note. The application examples provided in this section are specific to the ClearPass Policy Manager
(CPPM). Refer to the OmniVista Unified Policy Access Manager (UPAM) documentation for in-depth
configuration information and requirements.
To Next Page
Loading...
