Configuring Server Load Balancing Configuring SLB Probes
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 24-18
Associating a Probe with a Cluster
To associate an existing SLB probe with a cluster use the ip slb cluster probe command by entering ip
slb cluster followed by the user-configured cluster name, probe, and the user-configured probe name.
For example, to associate a probe called “cluster_probe1” with a cluster called “WorldWideWeb”, enter:
-> ip slb cluster WorldWideWeb probe cluster_probe1
Associating a Probe with a Server
To associate an existing SLB probe with a server use the ip slb server ip cluster probe command by
entering ip slb server ip followed by IP address of the server, cluster, the user-configured cluster name,
probe, and the user-configured probe name.
For example, to associate a probe called “server_probe1” with a server with an IP address of
10.255.11.127 that belongs to a cluster called “WorldWideWeb”, enter:
-> ip slb server ip 10.255.11.127 cluster WorldWideWeb probe server_probe1
Modifying SLB Probes
The following subsections describe how to modify existing SLB probes.
Modifying the Probe Timeout
To modify this value, use the ip slb probe timeout command by entering ip slb probe followed by the
user-configured probe name, the probe type, timeout, and the user-specified timeout value.
For example, to set the timeout for an HTTP SLB probe called “server_probe1” to 12000 seconds, enter:
-> ip slb probe server_probe1 http timeout 12000
Modifying the Probe Period
To modify this value, use the ip slb probe period command by entering ip slb probe followed by the
user-configured probe name, the probe type, period, and the user-specified period value.
For example, to set the period for an HTTP SLB probe called “server_probe1” to 120 seconds, enter:
-> ip slb probe server_probe1 http period 120
Note. See “Creating SLB Probes” on page 24-17 for a list of valid probe types.
Note. See “Creating SLB Probes” on page 24-17 for a list of valid probe types.
To Next Page
Loading...
