Alcatel-Lucent OmniSwitch 6860 Series

Configuring IP Multicast Switching IPMSv6 Default Values
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 25-3
IPMSv6 Default Values
The table below lists default values for the OmniSwitch IPMSv6 implementation.
Parameter Description Command Default Value/Comments
Administrative Status ipv6 multicast admin-state disabled
Flood initial unknown multicast
traffic
ipv6 multicast flood-unknown disabled
MLD Querier Forwarding ipv6 multicast querier-
forwarding
disabled
MLD Version ipv6 multicast version version 1
MLD Query Interval ipv6 multicast query-interval 125 seconds
MLD Last Member Query Interval ipv6 multicast last-member-
query-interval
1000 milliseconds
MLD Query Response Interval ipv6 multicast query-response-
interval
10000 milliseconds
MLD Router Timeout ipv6 multicast router-timeout 90 seconds
Source Timeout ipv6 multicast source-timeout 30 seconds
MLD Querying ipv6 multicast querying disabled
MLD Robustness ipv6 multicast robustness 2
MLD Spoofing ipv6 multicast spoofing disabled
MLD Zapping ipv6 multicast zapping disabled
Use an all-zero source IPv6 address
for MLD query packets
ipv6 multicast zero-based-
query
enabled