Configuring Access Guardian Access Guardian Defaults
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-8
Access Guardian Captive Portal Defaults
The following global default configuration settings apply to the OmniSwitch internal implementation of
the Captive Portal feature:
Access Guardian Captive Portal Profile Defaults
A Captive Portal profile defines and applies specific settings to devices classified into a UNP profile to
which the Captive Portal profile is assigned. The following table lists the default profile settings that are
defined when a Captive Portal profile is created through the captive-portal-profile command:
Description Command Default
Redirect URL name captive-portal name “captive-portal.com”
Redirect IP address captive-portal ip-address 10.123.0.1
Redirect user after successful
Captive Portal login.
captive-portal success-redirect-url No redirect
Proxy server port number captive-portal proxy-server-port 8080
Number of login attempts
allowed per Captive Portal
session.
captive-portal retry-count 3
QoS policy list or UNP profile
to apply to a user device after a
successful Captive Portal login.
captive-portal authentication-pass None
The amount of time between
interim accounting updates for
Captive Portal sessions.
aaa interim-interval 600 seconds
Captive Portal session time
limit.
aaa session-timeout Timer is disabled
The amount of time before an
inactive user is logged out of a
Captive Portal session.
aaa inactivity-logout Timer is disabled
Description Keyword Default
AAA configuration profile
assigned to the Captive Portal
profile.
aaa-profile No profile assigned
(Global AAA settings
apply)
Redirect user after successful
login.
success-redirect-url No redirect
Number of login attempts
allowed.
retry-count 3
QoS policy list to apply after
successful Captive Portal login.
authentication-pass policy-list No list assigned
UNP profile to apply after
successful Captive Portal login.
authentication-pass profile No profile assigned
To Next Page
Loading...
