Configuring Access Guardian BYOD Application Examples
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-149
Step 5. ClearPass (802.1X) - Confirm Device Authentication
Application Example 2: IP Phone — OmniSwitch Configuration
The OmniSwitch configuration for a non-supplicant IP phone:
1 Configure UNP port-based functionality as follows:
-> unp port 1/1/13 port-type bridge
-> unp port 1/1/13 mac-authentication
2 Configure MAC authentication for ClearPass RADIUS on an OmniSwitch as follows:
-> aaa radius-server alu-cppm host 10.255.95.250 key ale
-> aaa device-authentication mac alu-cppm
3 Configure the UNP profile as follows:
-> unp profile UNP-phone
-> unp profile UNP-phone map vlan 1002
Confirm device
Authentication
OmniSwitch
Confirm Device
Authentication
ClearPass
To Next Page
Loading...
