OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 27-1
27 Managing Policy
Servers
Quality of Service (QoS) policies that are configured through the PolicyView network management
application are stored on a Lightweight Directory Access Protocol (LDAP) server. PolicyView is an
OmniVista application that runs on an attached workstation.
In This Chapter
This chapter describes how LDAP directory servers are used with the switch for policy management.
There is no required configuration on the switch. When policies are created on the directory server through
PolicyView, the PolicyView application automatically configures the switch to communicate with the
server. This chapter includes information about modifying configuration parameters through the
Command Line Interface (CLI) if manual reconfiguration is necessary. For more details about the syntax
of commands, see the OmniSwitch AOS Release 8 CLI Reference Guide.
Throughout this chapter the term policy server is used to refer to LDAP directory servers used to store
policies. Procedures described in this chapter include:
• “Installing the LDAP Policy Server” on page 27-3
• “Modifying Policy Servers” on page 27-4
• “Verifying the Policy Server Configuration” on page 27-7
To Next Page
Loading...
