Configuring VLAN Stacking Configuring VLAN Stacking Services
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 35-12
Note that when an SVLAN is deleted, all port associations with the SVLAN are also removed.
Use the ethernet-service transparent-bridging command to display a list of VLAN Stacking VLANs
configured for the switch.
Configuring a VLAN Stacking Service
A VLAN Stacking service is identified by a name. The ethernet-service service-name command is used
to create a service and assign the service to an SVLAN ID, depending on the type of traffic the service
will process. The ID specified with this command identifies the SVLAN that will carry traffic for the
service. Each service is associated with only one SVLAN, but an SVLAN may belong to multiple
services.
To create a VLAN Stacking service, use the ethernet-service service-name command and specify a name
and SVLAN ID. For example, the following command creates a service named “Video-Service” and
associates the service with SVLAN 300:
-> ethernet-service service-name Video-Service svlan 300
The SVLAN ID specified with this command must already exist in the switch configuration; entering a
standard VLAN ID is not allowed. See “Configuring SVLANs” on page 35-11 for more information.
Once the VLAN Stacking service is created, the name is used to configure and display all components
associated with that service. The service name provides a single point of reference for a specific VLAN
Stacking configuration. For example, the following show ethernet-service command display shows how
the service name identifies a VLAN Stacking service and components related to that service:
-> show ethernet-service
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs : 1/1, 1/2
CVLAN(s) : 10, 20
sap-profile : sap-video1
SAP Id : 30
UNIs : 1/3
CVLAN(s) : untagged, 40
sap-profile : sap-video2
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
sap-profile : default-sap-profile
-> show ethernet-service service-name CustomerABC
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
To Next Page
Loading...
