Configuring VRRP Verifying the VRRP Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 23-19
Verifying the VRRP Configuration
A summary of the show commands used for verifying the VRRP configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide.
show vrrp|vrrp3 Displays the virtual router configuration for all virtual routers or for a
particular virtual router.
show vrrp|vrrp3 statistics Displays statistics about VRRP packets for all virtual routers configured
on the switch or for a particular virtual router.
show vrrp track Displays information about tracking policies on the switch.
show vrrp|vrrp3 track-
association
Displays the tracking policies associated with virtual routers.
show vrrp group Displays the default parameter values for all the virtual router groups or
for a specific virtual router group.
show vrrp group-association Displays the virtual routers that are associated with a group.
To Next Page
Loading...
