Configuring QoS In This Chapter
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 26-2
In This Chapter
This chapter describes QoS in general and how policies, port-based QoS configuration, and queue
management are used on the switch. It provides information about configuring QoS through the Command
Line Interface (CLI). CLI commands are used in the configuration examples; for more details about the
syntax of commands, see the OmniSwitch AOS Release 8 CLI Reference Guide.
The following topics and procedures are included in this chapter:
• “QoS General Overview” on page 26-3.
• “Classification” on page 26-5.
• “Congestion Management” on page 26-9.
• “OmniSwitCongestion Avoidance” on page 26-19.
• “Traffic Policing and Shaping” on page 26-22.
• “QoS Defaults” on page 26-33.
• “Configuring QoS” on page 26-37.
• “Policy Applications” on page 26-74.
To Next Page
Loading...
