Configuring VLAN Stacking VLAN Stacking Application Example
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 35-24
11 Associate the “map_pbit” profile to SAP 30 using the ethernet-service sap sap-profile command.
This profile will only apply to Customer B traffic, so it is not necessary to associate the profile with SAP
20.
-> ethernet-service sap 30 sap-profile map_pbit
12 Verify the VLAN Stacking service configuration using the show ethernet-service command.
-> show ethernet-service
Service Name : CustomerA
SVLAN : 100
NNI(s) : 3/1
SAP Id : 20
UNIs : 1/1
CVLAN(s) : all
sap-profile : default-sap-profile
Service Name : CustomerB
SVLAN : 200
NNI(s) : 3/1
SAP Id : 10
UNIs : 2/1
CVLAN(s) : 10
sap-profile : map_pbit
-> show ethernet-service
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
sap-profile : default-sap-profile
-> show ethernet-service service-name CustomerABC
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
sap-profile : default-sap-profile
To Next Page
Loading...
