Configuring VLANs Using Private VLANs
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 4-23
Enabling Ingress Source Filtering (ISF) for PVLANs
ISF can be enabled only on the Primary VLAN of a PVLAN configuration. When enabled on the Primary
VLAN, the configuration will be applied to the Secondary VLANs associated with the Primary VLAN.
Enabling IPMS for PVLANs
IPMS can be enabled only on the Primary VLAN of a PVLAN configuration.
Enabling STP for PVLANs
STP can be enabled only on the Primary VLAN of a PVLAN configuration. When enabled on the Primary
VLAN, the configuration will be applied to the Secondary VLANs associated to the Primary VLAN.
Note. The PVLAN feature is supported only when the switch is running in the flat (MSTP) Spanning Tree
mode; it is not supported in the per-VLAN mode.
To Next Page
Loading...
