Configuring Static Link Aggregation Quick Steps for Configuring Static Link Aggregation
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 8-4
An example of what these commands look like entered sequentially on the command line on the local
switch:
-> linkagg static agg 1 size 4
-> linkagg static port 1/1-4 agg 1
-> vlan 10 port default 1
And an example of what these commands look like entered sequentially on the command line on the
remote switch:
-> linkagg static agg 1 size 4
-> linkagg static port 1/9-12 agg 1
-> vlan 10 port default 1
To Next Page
Loading...
