Configuring Dynamic Link Aggregation Displaying Dynamic Link Aggregation Configuration and Statistics
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 9-29
Partner Admin Key : 8,
Partner Oper Key : 0,
Attached Agg Id : 0,
Actor Port : 7,
Actor Port Priority : 15,
Partner Admin Port : 0,
Partner Oper Port : 0,
Partner Admin Port Priority : 0,
Partner Oper Port Priority : 0,
Actor Admin State : act1.tim1.agg1.syn0.col0.dis0.def1.exp0,
Actor Oper State : act1.tim1.agg1.syn0.col0.dis0.def1.exp0,
Partner Admin State : act0.tim0.agg1.syn1.col1.dis1.def1.exp0,
Partner Oper State : act0.tim0.agg1.syn0.col1.dis1.def1.exp0
See the “Link Aggregation Commands” chapter in the OmniSwitch AOS Release 8 CLI Reference Guide
for complete documentation of show commands for link aggregation.
To Next Page
Loading...
