Configuring Access Guardian Using Quarantine Manager and Remediation
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-94
• QMR custom proxy port. This specifies the HTTP proxy port number to which quarantined client
traffic is redirected for remediation. The default HTTP port used is TCP 80 and TCP 8080.
The qmr quarantine custom-proxy-port command is used to configure a different proxy port number
to use. For example:
-> qmr quarantine custom-proxy 8888
QMR works on UNP and non-UNP ports. On non-UNP ports, L2 source learning receives the quarantined
MAC addresses from QMR and changes the MAC status to 'quarantined'. However, on UNP ports, L2
source learning will not show the quarantined MAC addresses as 'quarantined'. In this case, the
appropriate status of the MAC address is displayed through UNP commands.
Use the show qmr command to verify the QMR configuration on the switch and use the show quarantine
mac group command to display a list of the quarantined MAC addresses known to the switch.
For an example of configuring a custom QMR role (policy list) to apply to quarantined users, see the
“Application Example 6: Restricted Role (Policy List) Assignment” on page 28-106.
To Next Page
Loading...
